- Équipements ProVicto - Homepage>
- SANDER AND GRINDER 8 '' X 2 ''
SANDER AND GRINDER 8 '' X 2 ''
Product Code: CT169N
Bench Grinder & Belt Sander Combo – Craftex
The CT169N grinder and sander combo tool is perfect for knife honing, tool sharpening and sanding small parts.
The 1/2-HP, 120-Volts motor provides a 3450 RPM grinding speed to handle just about any metal grinding job.
The sanding belt is 28” x 2” used to sand both soft wood and hard wood. The belt sander can be tilted through
90-degree from horizontal position to vertical position and can be locked to any angle in between.
The grinding wheel features an eye shield to protect the operators face from sparks produced while grinding.
CT169N is equipped with a 1-1/8” dust port to remove the dust produced while sanding
and a work lamp for increased operation visibility.
SPECIFICATIONS
The CT169N grinder and sander combo tool is perfect for knife honing, tool sharpening and sanding small parts.
The 1/2-HP, 120-Volts motor provides a 3450 RPM grinding speed to handle just about any metal grinding job.
The sanding belt is 28” x 2” used to sand both soft wood and hard wood. The belt sander can be tilted through
90-degree from horizontal position to vertical position and can be locked to any angle in between.
The grinding wheel features an eye shield to protect the operators face from sparks produced while grinding.
CT169N is equipped with a 1-1/8” dust port to remove the dust produced while sanding
and a work lamp for increased operation visibility.
SPECIFICATIONS
| Motor | 1/2-HP, 120-Volts, Single Phase, 60-Hz | |||
| No Load Speed | 3450 RPM | |||
| Amps | 2.5 Amps | |||
| Grinding Wheel Diameter | 8” | |||
| Grinding Wheel Material | Aluminum Oxide | |||
| Grinding Wheel Grit | #36 | |||
| Sanding Belt Size | Length 28” x Width 2” | |||
| Belt Angle | 0 – 90-Degree | |||
| Dust Port | 1-1/8” | |||
| Light Bulb | 12-V, 10-W | |||
| Weight | 18.50 Kgs |
- Quantity Available: 0